Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
Table 28: show interfaces Fast Ethernet Output Fields (continued)
Field Name
CoS information
Logical Interface
Logical interface
Index
SNMP ifIndex
Generation
Flags
186
Field Description
Information about the CoS queue for the physical interface.
• CoS transmit queue—Queue number and its associated user-configured
forwarding class name.
• Bandwidth %—Percentage of bandwidth allocated to the queue.
• Bandwidth bps—Bandwidth allocated to the queue (in bps).
• Buffer %—Percentage of buffer space allocated to the queue.
• Buffer usec—Amount of buffer space allocated to the queue, in microseconds.
This value is nonzero only if the buffer size is configured in terms of time.
• Priority—Queue priority: low or high.
• Limit—Displayed if rate limiting is configured for the queue. Possible values
are none and exact. If exact is configured, the queue transmits only up to the
configured bandwidth, even if excess bandwidth is available. If none is
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Name of the logical interface.
Index number of the logical interface, which reflects its initialization sequence.
SNMP interface index number for the logical interface.
Unique number for use by Juniper Networks technical support only.
Information about the logical interface. Possible values are described in the
“Logical Interface Flags” section under “Common Output Fields Description”
on page 125.
Level of Output
extensive
All levels
detail extensive none
detail extensive none
detail extensive
All levels
Copyright © 2012, Juniper Networks, Inc.