14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table 26: Aggregated Ethernet show interfaces Output Fields (continued)<br />

Field Name<br />

Queue counters<br />

Logical Interface<br />

Logical interface<br />

Index<br />

SNMP ifIndex<br />

Generation<br />

Flags<br />

VLAN-Tag<br />

Demux<br />

Encapsulation<br />

Statistics<br />

Field Description<br />

CoS queue number and its associated user-configured forwarding class name.<br />

• Queued packets—Number of queued packets.<br />

• Transmitted packets—Number of transmitted packets.<br />

• Dropped packets—Number of packets dropped by the ASIC's RED mechanism.<br />

Name of the logical interface.<br />

Index number of the logical interface (which reflects its initialization sequence).<br />

SNMP interface index number of the logical interface.<br />

Unique number for use by <strong>Juniper</strong> <strong>Networks</strong> technical support only.<br />

Information about the logical interface. Possible values are described in the<br />

“Logical Interface Flags” section under “Common Output Fields Description”<br />

on page 125.<br />

Tag Protocol Identifier (TPID) and VLAN identifier.<br />

IP demultiplexing (demux) value that appears if this interface is used as the<br />

demux underlying interface. The output is one of the following:<br />

• Source Family Inet<br />

• Destination Family Inet<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.<br />

Encapsulation on the logical interface.<br />

Information about the number of packets, packets per second, number of bytes,<br />

and bytes per second on this aggregate interface.<br />

• Bundle—Information about input and output bundle rates.<br />

• Link—(detail and extensive only) Information about specific links in the<br />

aggregate, including link state and input and output rates.<br />

• Marker Statistics—(detail and extensive only) Information about 802.3ad<br />

marker protocol statistics on the specified links.<br />

• Marker Rx—Number of valid marker PDUs received on this aggregation<br />

port.<br />

Chapter 4: Ethernet Interface Operational Mode <strong>Command</strong>s<br />

• Resp Tx—Number of marker response PDUs transmitted on this aggregation<br />

port.<br />

• Unknown Rx—Number of frames received that either carry the slow<br />

protocols Ethernet type value (43B.4) but contain an unknown protocol<br />

data unit (PDU), or are addressed to the slow protocols group MAC address<br />

(43B.3) but do not carry the slow protocols Ethernet type.<br />

• Illegal Rx—Number of frames received that carry the slow protocols<br />

Ethernet type value (43B.4) but contain a badly formed PDU or an illegal<br />

value of protocol subtype (43B.4).<br />

Level of Output<br />

detail extensive<br />

All levels<br />

detail extensive none<br />

detail extensive none<br />

detail extensive<br />

All levels<br />

All levels<br />

detail extensive none<br />

All levels<br />

detail extensive none<br />

167

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!