Junos OS Interfaces Command Reference - Juniper Networks

show interfaces (ISDN Dialer)
Syntax show interfaces dlnumber
Release Information Command introduced before Junos OS Release 7.4.
Description (J Series routers only) Display information about the ISDN dialer interface.
Required Privilege
Options dlnumber—Display standard information about the specified ISDN dialer interface.
Level
brief | detail | extensive | terse—(Optional) Display brief interface information.
descriptions—(Optional) Display the interface description string.
media—(Optional) Display media-specific information.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
view
List of Sample Output show interfaces (ISDN Dialer) on page 662
show interfaces brief (ISDN Dialer) on page 663
show interfaces detail (ISDN Dialer) on page 663
show interfaces extensive (ISDN Dialer) on page 664
Output Fields Table 114 on page 657 lists the output fields for the show interfaces (ISDN dialer) command.
Output fields are listed in the approximate order in which they appear.
Table 114: ISDN Dialer show interfaces Output Fields
Field Name
Physical Interface
Physical Interface
Enabled
Interface index
SNMP ifIndex
Generation
Field Description
Copyright © 2012, Juniper Networks, Inc.
Name of the physical interface type.
State of the interface. Possible values are described in the “Enabled Field”
section under “Common Output Fields Description” on page 125.
Physical interface index number that reflects its initialization sequence.
SNMP index number for the physical interface.
Unique number for use by Juniper Networks technical support only.
Chapter 14: ISDN Interface Operational Mode Commands
Level of Output
All levels
All levels
detail extensive none
detail extensive none
detail extensive
657