14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Junos</strong> <strong>OS</strong> 12.1 <strong>Interfaces</strong> <strong>Command</strong> <strong>Reference</strong><br />

Table 128: Channelized STM1 show interfaces Output Fields (continued)<br />

Field Name<br />

Statistics last<br />

cleared<br />

Traffic statistics<br />

Input errors<br />

732<br />

Field Description<br />

Time when the statistics for the interface were last set to zero.<br />

Number and rate of bytes and packets received and transmitted on the physical<br />

interface.<br />

• Input bytes—Number of bytes received on the interface.<br />

• Output bytes—Number of bytes transmitted on the interface.<br />

• Input packets—Number of packets received on the interface.<br />

• Output packets—Number of packets transmitted on the interface.<br />

Input errors on the interface. The following paragraphs explain the counters<br />

whose meaning might not be obvious:<br />

• Errors—Sum of the incoming frame aborts and FCS errors.<br />

• Drops—Number of packets dropped by the input queue of the I/O Manager<br />

ASIC. If the interface is saturated, this number increments once for every<br />

packet that is dropped by the ASIC's RED mechanism.<br />

• Framing errors—Number of packets received with an invalid frame checksum<br />

(FCS).<br />

• Policed discards—Number of frames that the incoming packet match code<br />

discarded because they were not recognized or not of interest. Usually, this<br />

field reports protocols that the <strong>Junos</strong> <strong>OS</strong> does not handle.<br />

• L3 incompletes—Number of incoming packets discarded because they failed<br />

Layer 3 (usually IPv4) sanity checks of the header. For example, a frame with<br />

less than 20 bytes of available IP header is discarded.<br />

• L2 channel errors—Number of times the software did not find a valid logical<br />

interface for an incoming frame.<br />

• L2 mismatch timeouts—Number of malformed or short packets that caused<br />

the incoming packet handler to discard the frame as unreadable.<br />

• HS link CRC errors—Number of errors on the high-speed links between the<br />

ASICs responsible for handling the router interfaces.<br />

• SRAM errors—Number of hardware errors that occurred in the static RAM<br />

(SRAM) on the PIC. If the value of this field increments, the PIC is<br />

malfunctioning.<br />

Level of Output<br />

detail extensive<br />

detail extensive<br />

extensive<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!