Junos OS Interfaces Command Reference - Juniper Networks

show ppp summary
Syntax show ppp summary
Release Information Command introduced in Junos OS Release 7.5.
Description Display PPP session summary information.
Required Privilege
Options This command has no options.
Level
view
List of Sample Output show ppp summary on page 463
Output Fields Table 81 on page 463 lists the output fields for the show ppp summary command. Output
Sample Output
fields are listed in the approximate order in which they appear.
Table 81: show ppp summary Output Fields
Field Name
Interface
Session type
Session phase
Session flags
Field Description
Interface on which the PPP session is running. An interface type of
pp0 indicates an Ethernet interface type on a M120 or M320 router.
Type of session: PPP or Cisco-HDLC.
PPP process phases: Authenticate, Pending, Establish, Network,
Disabled.
Special conditions present in the session, such as Bundled, TCC,
No-keepalives, Looped, Monitored, and NCP-only.
show ppp summary user@host> show ppp summary
Interface Session type Session phase Session flags
at-4/0/0.456 PPP Network
lsq-0/3/0.0 PPP Disabled
lsq-1/0/0.0 PPP Disabled
rlsq0.0 PPP Network NCP-only
so-1/0/0.0 PPP Authenticate
so-1/0/1.0 PPP Disabled Looped
so-2/0/0.0 Cisco-HDLC Establish
so-4/0/0.0 PPP Establish Monitored
t1-1/3/0:1.0 PPP Network Bundled
t1-1/3/0:2.0 PPP Network Bundled
pp0.12 PPP Network
Copyright © 2012, Juniper Networks, Inc.
Chapter 8: PPP Interface Operational Mode Commands
463