Junos OS Interfaces Command Reference - Juniper Networks

show pppoe underlying-interfaces
Syntax show pppoe underlying-interfaces
Release Information Command introduced in Junos OS Release 10.0.
lockout option added in Junos OS Release 11.4.
Description (M120, M320, and MX Series routers only) Display information about PPPoE underlying
Required Privilege
interfaces.
Options brief | detail | extensive—(Optional) Display the specified level of output.
Level
Related
Documentation
lockout—(Optional) Display summary information about the lockout condition and the
lockout grace period for PPPoE clients on the PPPoE underlying interface.
logical-interface-name—(Optional) Name of a PPPoE underlying logical interface.
view
•
Verifying and Managing Dynamic PPPoE Configuration
• Configuring an Underlying Interface for Dynamic PPPoE Subscriber Interfaces
• Configuring the PPPoE Family for an Underlying Interface
List of Sample Output show pppoe underlying-interfaces brief on page 497
show pppoe underlying-interfaces detail on page 498
show pppoe underlying-interfaces extensive on page 498
show pppoe underlying-interfaces extensive (PPPoE client in lockout
condition) on page 499
show pppoe underlying-interfaces lockout on page 499
Output Fields Table 89 on page 495 lists the output fields for the show pppoe underlying-interfaces
command. Output fields are listed in the approximate order in which they appear.
Table 89: show pppoe underlying-interfaces Output Fields
Field Name
Underlying
Interface
Service Name
Table
Dynamic Profile
Field Description
Copyright © 2012, Juniper Networks, Inc.
Name of the PPPoE underlying logical interface.
Name of the service name table.
Name of the dynamic profile that was used to create this interface. If the
interface was statically created, then the value is none.
Chapter 9: PPPoE Interface Operational Mode Commands
Level of Output
All levels
All levels
All levels
495