Junos OS Interfaces Command Reference - Juniper Networks

CHAPTER 3
Common Output Fields
Common Output Fields Description
Destination Class Field
Enabled Field
Copyright © 2012, Juniper Networks, Inc.
• Common Output Fields Description on page 125
This chapter explains the content of the output fields, which appear in the output of most
show interfaces commands.
For the logical interface, the Destination class field provides the names of destination
class usage (DCU) counters per family and per class for a particular interface. The counters
display packets and bytes arriving from designated user-selected prefixes. For example:
Packets Bytes
Destination class (packet-per-second) (bits-per-second)
gold 1928095 161959980
( 889) ( 597762)
bronze 0 0
( 0) ( 0)
silver 0 0
( 0) ( 0)
For the physical interface, the Enabled field provides information about the state of the
interface, displaying one or more of the following values:
• Administratively down, Physical link is Down—The interface is turned off, and the physical
link is inoperable and cannot pass packets even when it is enabled.To change the
interface state to Enabled, use the following command:
user@host# set interfaces interface enable
Manually verify the connections to bring the physical link up.
• Administratively down, Physical link is Up—The interface is turned off, but the physical
link is operational and can pass packets when it is enabled.To change the interface
state to Enabled, use the following command:
user@host# set interfaces interface enable
125