Junos OS Interfaces Command Reference - Juniper Networks

show lacp statistics
Syntax show lacp statistics interfaces
Release Information Command introduced in JUNOS Release 9.4
Description Display Link Aggregation Control Protocol (LACP) statistics
Required Privilege
Options interfaces —Display LACP interface statistics.
Level
Related
Documentation
interface-name—(Optional) Display LACP statistics for the specified interface.
view
•
show lacp interfaces on page 287
• clear lacp statistics on page 141
List of Sample Output show lacp statistics on page 291
Output Fields Table 43 on page 291 lists the output fields for the show lacp statistics command. Output
fields are listed in the approximate order in which they appear.
Table 43: show lacp statistics Output Fields
Field Name
Aggregated interface
LACP
Statistics
LACP Rx
LACP Tx
Unknown Rx
Illegal Rx
Sample Output
Field Description
Name of aggregated interface.
LACP statistics information for each interface.
LACP received counter that increments for each normal hello.
LACP counter of transmitted packets..
Number of unrecognized packet errors logged.
Number of invalid packets received.
show lacp statistics user@host> show lacp statistics interfaces ae0
Aggregated interface: ae0
LACP Statistics: LACP Rx LACP Tx Unknown Rx Illegal Rx
ge-4/0/20 0 6 0 0
ge-2/0/24 0 6 0 0
ge-3/0/32 0 6 0 0
ge-3/0/35 0 6 0 0
ge-3/0/34 0 6 0 0
Copyright © 2012, Juniper Networks, Inc.
Chapter 4: Ethernet Interface Operational Mode Commands
291