Junos OS Interfaces Command Reference - Juniper Networks

clear oam ethernet connectivity-fault-management continuity-measurement
Syntax clear oam ethernet connectivity-fault-management continuity-measurement
maintenance-domain md-name
maintenance-association ma-name
Release Information Command introduced in Junos OS Release 11.1.
Description For all routers that support IEEE 802.1ag OAM connectivity fault management (CFM),
Required Privilege
clear the existing continuity measurement and restart counting the operational uptime
(that is, the total time during which CCM adjacency is active for a particular remote MEP.).
Options maintenance-domain md-name—Name of an existing CFM maintenance domain.
Level
maintenance-association ma-name—Name of an existing CFM maintenance association.
local-mep local-mep-id—(Optional) Display connectivity fault management information
for the specified local MEP only.
remote-mep remote-mep-id—(Optional) Display connectivity fault management
view
information for the specified remote MEP only.
List of Sample Output clear oam ethernet connectivity-fault-management
continuity-measurement on page 145
Output Fields When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear oam ethernet
connectivity-fault-
management
continuity-measurement
Copyright © 2012, Juniper Networks, Inc.
Chapter 4: Ethernet Interface Operational Mode Commands
user@host> clear oam ethernet connectivity-fault-management continuity-measurement
maintenance-domain md5 maintenance-association ma5 local-mep 100 remote-mep 102
Continuity measurement restarted.
145