Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
Table 99: OC192 PIC with XFP show interfaces diagnostics optics Output Fields (continued)
Field Name
Laser bias current
Laser output power
Module temperature
Laser rx power
Laser bias current high
alarm
Laser bias current low
alarm
Laser bias current high
warning
Laser bias current low
warning
Laser output power high
alarm
Laser output power low
alarm
Laser output power high
warning
Laser output power low
warning
Module temperature
high alarm
Module temperature
low alarm
Module temperature
high warning
Module temperature
low warning
Laser rx power high
alarm
566
Field Description
Magnitude of the laser bias power setting current, in milliamperes. The laser bias provides direct
modulation of laser diodes and modulates currents.
Laser output power, in milliwatts (mW) and decibels, referenced to 1.0 mW (dBm). This is a software
equivalent to the LsPOWMON pin in hardware.
Temperature of the XFP optics module, in Celsius and Fahrenheit.
Laser received optical power, in mW and dBm.
Laser bias power setting high alarm. Displays on or off.
Laser bias power setting low alarm. Displays on or off.
Laser bias power setting high warning. Displays on or off.
Laser bias power setting low warning. Displays on or off.
Laser output power high alarm. Displays on or off.
Laser output power low alarm. Displays on or off.
Laser output power high warning. Displays on or off.
Laser output power low warning. Displays on or off.
Module temperature high alarm. Displays on or off.
Module temperature low alarm. Displays on or off.
Module temperature high warning. Displays on or off.
Module temperature low warning. Displays on or off.
Receive laser power high alarm. Displays on or off.
Copyright © 2012, Juniper Networks, Inc.