Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces policers
Syntax show interfaces policers
Release Information Command introduced before Junos OS Release 7.4.
Command introduced on PTX Series Packet Transport Switches for Junos OS Release
12.1.
Description Display all policers that are installed on each interface in a system.
Options none—Display policer information about all interfaces.
interface-name—(Optional) Display filter information about a particular interface.
Additional Information For information about how to configure policers, see the Junos Policy Framework
Required Privilege
Level
Configuration Guide. For related operational mode commands, see the Junos Routing
Protocols and Policies Command Reference.
view
List of Sample Output show interfaces policers on page 59
58
show interfaces policers interface-name on page 59
show interfaces policers (PTX Series Packet Transport Switches) on page 59
Output Fields Table 16 on page 58 lists the output fields for the show interfaces policers command.
Output fields are listed in the approximate order in which they appear.
Table 16: show interfaces policers Output Fields
Field Name
Interface
Admin
Link
Proto
Input Policer
Output Policer
Field Description
Name of the interface.
Interface state: up or down.
Link state: up or down.
Protocol configured on the interface.
Policer to be evaluated when packets are received on the interface.
It has the format interface-name-in-policer.
Policer to be evaluated when packets are transmitted on the
interface. It has the format interface-name-out-policer.
Copyright © 2012, Juniper Networks, Inc.