Junos OS Interfaces Command Reference - Juniper Networks

Table 55: show oam ethernet connectivity-fault-management policer Output Fields (continued)
Field Name
Maintenance
association
Policer
Type
Scope
Drop count
Sample Output
show oam ethernet
connectivity-fault
-management
policer
show oam ethernet
connectivity-fault
-management
policer
maintenance-domain
md-name
Field Description
Displays the maintenance association name.
Displays the policer name.
Policer type. Value cc means this policer is used only to police continuity check CFM messages. Value
other means this policer is used only to police non-continuity check CFM messages. Value all means
this policer is used to police all CFM messages.
Policer scope. Displays whether the global (G) policer configuration is applicable or the session (S)
specific policer config is applicable.
Displays the number of packets dropped by the indicated policer.
Displays the policer information for all maintenance associations and their maintenance
domains.
Copyright © 2012, Juniper Networks, Inc.
show oam ethernet connectivity-fault-management policer
Legend for Policer
G - Global scope
S - Service scope
cc - Continuity check
Maintenance Domain: md1 Level: 1
Maintenance association Policer Type Scope Drop count
ma1 cfm-policer1 all G 300
ma1-2 cfm-policer1 cc S 259
ma1-2 cfm-policer1 other G 300
Maintenance Domain: md2 Level: 2
Maintenance association Policer Type Scope Drop count
ma2 cfm-policer1 cc G 300
ma2 cfm-policer2 other S 223
Displays the policer information for the specified maintenance domain and its
maintenance associations.
Chapter 4: Ethernet Interface Operational Mode Commands
show oam ethernet connectivity-fault-management policer maintenance-domain md1
Legend for Policer
G - Global scope
S - Service scope
cc - Continuity check
Maintenance Domain: md1 Level: 1
Maintenance association Policer Type Scope Drop count
ma1 cfm-policer1 all G 300
ma1-2 cfm-policer1 cc S 259
ma1-2 cfm-policer1 other G 300
347