Junos OS Interfaces Command Reference - Juniper Networks

show interfaces (Channelized T1 IQ)
Syntax show interfaces (ct1-fpc/pic/port | type-fpc/pic/port)
Release Information Command introduced in Junos OS Release 7.4.
Description (M Series and T Series routers only) Display status information about the specified
Required Privilege
channelized T1 IQ interface.
Options type-fpc/pic/port:channel—Interface type. With optional corresponding channel levels,
Level
the interface type can be one of the following:
• type-fpc/pic/port—For the physical channelized T1 IQ interface, type is ct1.
• type-fpc/pic/port:channel—For the clear channel, type is t1. At the first level of
channelization, type can be ct1 or t1.
• type-fpc/pic/port:channel:channel—At the second level of channelization, type can
be ds.
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about network interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display static interface statistics.
view
List of Sample Output show interfaces extensive (CT1) on page 771
show interfaces extensive (T1) on page 772
show interfaces extensive (DS0) on page 773
Output Fields Table 132 on page 763 lists the output fields for the show interfaces (Channelized T1 IQ
and T3 IQ interfaces) command. Output fields are listed in the approximate order in
which they appear.
Table 132: Channelized T1 IQ and T3 IQ show interfaces Output Fields
Field Name
Physical Interface
Physical interface
Field Description
Copyright © 2012, Juniper Networks, Inc.
Name of the physical interface.
Chapter 18: Channelized T1 and T3 Interface Operational Mode Commands
Level of Output
All levels
763