Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show interfaces (Management Ethernet [TX Matrix Plus Router]) on page 948
show interfaces (Management Ethernet [PTX Series Packet Transport
Switches]) on page 948
show interfaces detail (Management Ethernet) on page 948
show interfaces detail (Management Ethernet [TX Matrix Plus Router]) on page 949
show interfaces detail (Management Ethernet [PTX Packet Transport
Switches]) on page 949
show interfaces extensive (Management Ethernet) on page 950
show interfaces extensive (Management Ethernet [TX Matrix Plus Router]) on page 951
show interfaces extensive (Management Ethernet [PTX Series Packet Transport
Switches]) on page 952
show interfaces brief (Management Ethernet) on page 952
show interfaces brief (Management Ethernet [TX Matrix Plus Router]) on page 953
show interfaces brief (Management Ethernet [PTX Series Packet Transport
Switches]) on page 953
show interfaces (Internal Ethernet) on page 953
show interfaces (Internal Ethernet [TX Matrix Plus Router]) on page 954
show interfaces detail (Internal Ethernet) on page 954
show interfaces detail (Internal Ethernet [TX Matrix Plus Router]) on page 955
show interfaces extensive (internal Ethernet) on page 956
show interfaces extensive (internal Ethernet [TX Matrix Plus Router]) on page 957
Output Fields Table 166 on page 944 lists the output fields for the show interfaces (management)
command on the M Series routers, T Series routers, TX Matrix Plus routers, and PTX
Series Packet Transport Switches. Output fields are listed in the approximate order in
which they appear.
Table 166: M Series and T Series Router Management and Internal Ethernet show interfaces
Output Fields
Field Name
Physical Interface
Physical interface
Enabled
Interface index
SNMP ifIndex
Generation
Type
Link-level type
MTU
Clocking
944
Field Description
Name of the physical interface.
State of the interface. Possible values are described in the “Enabled Field”
section under “Common Output Fields Description” on page 125.
Physical interface index number, which reflects its initialization sequence.
SNMP index number for the physical interface.
Unique number for use by Juniper Networks technical support only.
Type of interface.
Encapsulation type used on the physical interface.
Maximum transmission unit (MTU)—Size of the largest packet to be transmitted.
Reference clock source of the interface.
Level of Output
All levels
All levels
detail extensive none
detail extensive none
detail extensive
All levels
All levels
All levels
All levels
Copyright © 2012, Juniper Networks, Inc.