Junos OS Interfaces Command Reference - Juniper Networks

show oam ethernet fnp status
Syntax show oam ethernet fnp status
Release Information Command introduced in Junos OS Release 11.4
Description On MX Series routers with Gigabit Ethernet, Fast Ethernet, or aggregated Ethernet PICs,
Required Privilege
displays OAM Ethernet Failure Notification Protocol (FNP) status.
Options interface-name—(Optional) Display Ethernet FNP information for the specified Ethernet
Level
interface only.
routing-instance-name—(Optional) Display FNP for the specified routing instance.
view
List of Sample Output show oam ethernet fnp status on page 353
Output Fields Table 59 on page 353 lists the output fields for the show oam ethernet fnp status command.
Sample Output
show oam ethernet fnp
status
Output fields are listed in the approximate order in which they appear.
Table 59: show oam ethernet fnp status Output Fields
Field Name
FNP interval
Loss threshold
FNP enabled interfaces
Interface
Domain ID
Copyright © 2012, Juniper Networks, Inc.
STP Root ID
FNP Messages
Chapter 4: Ethernet Interface Operational Mode Commands
Field Description
The time interval between messages.
The number of messages that can be lost before FNP is marked
as down.
Displays interfaces that are enabled.
The name of the interface.
Domain ID of the message.
The spanning tree Root ID of the message.
The total number of messages received.
user@host> show oam ethernet status
FNP interval:
Loss threshold
FNP enabled interfaces
Interface Domain ID STP Root ID FNP Messages
ge-0/0/0.1278 100 0.f0:ff:ff:ff:ff:ff 0
353