14.12.2012 Views

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

Junos OS Interfaces Command Reference - Juniper Networks

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>Junos</strong> <strong>OS</strong> 12.1 <strong>Interfaces</strong> <strong>Command</strong> <strong>Reference</strong><br />

518<br />

Sync loss count: 0<br />

Data signal:<br />

Rx Clock: OK<br />

Control signals:<br />

Local mode: DTE<br />

To DCE: DTR: up, RTS: up<br />

From DCE: CTS: up, DCD: up, DSR: up<br />

Clocking mode: internal<br />

Loopback: none<br />

Tx clock: non-invert<br />

Line encoding: nrz<br />

Logical interface se-6/0/0.0 (Index 75) (SNMP ifIndex 69) (Generation 141)<br />

Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: PPP<br />

Protocol inet, MTU: 256, Generation: 145, Route table: 0<br />

Flags: None<br />

Addresses, Flags: Is-Preferred Is-Primary<br />

Destination: 11.11.11/24, Local: 11.11.11.2, Broadcast: 11.11.11.255,<br />

Generation: 157<br />

Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!