Junos OS Interfaces Command Reference - Juniper Networks

show interfaces (PPPoE)
Syntax show interfaces pp0.logical
Release Information Command introduced before Junos OS Release 7.4.
Description (J Series Services Routers, M120 routers, M320 routers, and MX Series routers only)
Required Privilege
Display status information about the PPPoE interface.
Options pp0.logical—Display standard status information about the PPPoE interface.
Level
brief | detail | extensive | terse—(Optional) Display the specified level of output.
descriptions—(Optional) Display interface description strings.
media—(Optional) Display media-specific information about PPPoE interfaces.
snmp-index snmp-index—(Optional) Display information for the specified SNMP index
of the interface.
statistics—(Optional) Display PPPoE interface statistics.
view
List of Sample Output show interfaces (PPPoE) on page 477
show interfaces (PPPoE over Aggregated Ethernet) on page 477
show interfaces brief (PPPoE) on page 477
show interfaces detail (PPPoE) on page 478
show interfaces detail (PPPoE on J Series Services Routers) on page 478
show interfaces extensive (PPPoE on M120 and M320 Routers) on page 479
Output Fields Table 83 on page 471 lists the output fields for the show interfaces (PPPoE) command.
Output fields are listed in the approximate order in which they appear.
Table 83: show interfaces (PPPoE) Output Fields
Field Name
Physical Interface
Physical interface
Enabled
Interface index
Field Description
Copyright © 2012, Juniper Networks, Inc.
Name of the physical interface.
State of the interface. Possible values are described in the “Enabled Field”
section under “Common Output Fields Description” on page 125.
Physical interface index number, which reflects its initialization sequence.
Chapter 9: PPPoE Interface Operational Mode Commands
Level of Output
All levels
All levels
detail extensive none
471