Junos OS Interfaces Command Reference - Juniper Networks

Table 28: show interfaces Fast Ethernet Output Fields (continued)
Field Name
Frequency
CoS queues
Schedulers
Hold-times
Current address
Hardware address
Last flapped
Input Rate
Output Rate
Statistics last
cleared
Traffic statistics
Field Description
(10-Gigabit Ethernet DWDM interfaces only) Displays the frequency associated
with the configured wavelength, in terahertz (THz).
Number of CoS queues configured.
(GigabitEthernet intelligent queuing 2 (IQ2) interfaces only) Number of CoS
schedulers configured.
Current interface hold-time up and hold-time down, in milliseconds.
Configured MAC address.
Hardware MAC address.
Date, time, and how long ago the interface went from down to up. The format
is Last flapped: year-month-day hour:minute:second:timezone (hour:minute:second
ago). For example, Last flapped: 2002-04-26 10:52:40 PDT (04:33:20 ago).
Input rate in bits per second (bps) and packets per second (pps).
Output rate in bps and pps.
Copyright © 2012, Juniper Networks, Inc.
Time when the statistics for the interface were last set to zero.
Number and rate of bytes and packets received and transmitted on the physical
interface.
• Input bytes—Number of bytes received on the interface
• Output bytes—Number of bytes transmitted on the interface.
• Input packets—Number of packets received on the interface.
• Output packets—Number of packets transmitted on the interface.
Chapter 4: Ethernet Interface Operational Mode Commands
Gigabit Ethernet and 10-Gigabit Ethernet IQ PICs count the overhead and CRC
bytes.
For Gigabit Ethernet IQ PICs, the input byte counts vary by interface type. For
more information, see Table 31 under the show interfaces (10-Gigabit Ethernet)
command.
Level of Output
All levels
detail extensive none
extensive
detail extensive
detail extensive none
detail extensive none
detail extensive none
None specified
None specified
detail extensive
detail extensive
177