Junos OS Interfaces Command Reference - Juniper Networks

Junos OS 12.1 Interfaces Command Reference
show aps
Syntax show aps
Release Information Command introduced before Junos OS Release 7.4.
Description Display information about Automatic Protection Switching (APS) for SONET
Required Privilege
configurations and about Multiplex Section Protection (MSP) for SDH configurations.
Options none—(Same as brief) Display brief information about APS or MSP for all groups and
Level
SONET/SDH interfaces.
brief | detail | extensive | summary—(Optional) Display the specified level of output.
group group—(Optional) Display APS or MSP information for the specified group.
interface so-fpc/pic/port—(Optional) Display APS information for the specified
view
SONET/SDH interface.
List of Sample Output show aps on page 524
522
show aps brief on page 524
show aps detail on page 524
show aps extensive on page 524
Output Fields Table 94 on page 523 lists the output fields for the show aps command. Output fields are
listed in the approximate order in which they appear.
Copyright © 2012, Juniper Networks, Inc.