ENVIRONMENTAL FINAL GOVERNING STANDARDS ITALY

ITALY - 3 Drinking Water
Table 3.4-a. Inorganics Monitoring Requirements (DoD-Produced Water)
Parameter
Frequency
(See Table 3.5-a)
Note
Aluminum Check Monitoring Necessary only when used as flocculants
or present, in significant concentration, in
the drinking water source utilized
Ammonium Check Monitoring
Antimony Audit monitoring
Arsenic Audit monitoring
Asbestos 1 sample every 9
years
Barium 1 sample every 3
years
Beryllium 1 sample every 3
years
Boron Audit monitoring
Bromate Audit monitoring
Cadmium Audit monitoring
Chlorides Audit monitoring
Chlorite Audit monitoring
Chromium Audit monitoring
Copper Audit monitoring
Conductivity Check Monitoring
Cyanide Audit monitoring
Dry Residues at
180°C
Audit monitoring
Necessity for analysis is predicated upon
a vulnerability assessment conducted by
the PWS
The frequency must be increased to an
annual sample if water is produced from
Surface Water
The frequency must be increased to an
annual sample if water is produced from
Surface Water
Fluoride Audit monitoring Daily monitoring is recommended for
systems practicing fluoridation (see Table
3.10 for fluoridation criteria)
Hydrogen ion
concentration
Check Monitoring
Iron Check Monitoring Necessary only when used as flocculant
or present, in significant concentration, in
September 2012 Italy FGS 3-20
Revision 0