Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
start delay is displayed in the status line (first line on the "Presence simulation" screen page).<br />
i The current weekday is set either directly on the panel or by time telegram<br />
(DPT 10,001 3 bytes) via the bus.<br />
i The previously recorded telegrams of the simulation are worked through chronologically.<br />
The time of processing depends on the starting time of the simulation. If, for example, the<br />
recording period began at 8:00 but playback is not started until 9:00, then only those telegrams<br />
will be transmitted which were recorded at or after 9:00. Telegrams before this time<br />
are only taken into account in the next cycle (only time or time/weekday-dependent).<br />
On playing a recording period back, the telegrams are only transmitted once within a cycle.<br />
If, during playback, the time of the panel is put back, then the panel will not transmit previously<br />
transmitted telegrams of a cycle. If the time is put forward, then the panel detects<br />
which telegrams are to be jumped over, and then transmits the telegrams in one go, thus<br />
matching the telegram sequence with the current time.<br />
The same thing happens if, during the recording phase, the time was put back, for example<br />
on changing from summer to winter time. In this case, the panel checks during playback to<br />
see if the telegram following the current one is more recent in the recording. If this is not<br />
the case, due to the change in time in the recording, then the older telegrams are transmitted<br />
immediately until the time stamp matches again.<br />
i Active playback can be signalled to the bus using the<br />
1 bit communication object "Playback active", which can be planned in the presence simulation<br />
parameter node in the ETS plug-in.<br />
i Simulation playback only ever takes place using the group addresses of the recording objects<br />
to be sent.<br />
i During active playback, it is not necessary to keep the system page of the presence simulation<br />
visible. During this time, the panel can be operated normally.<br />
Order-No. 7574 00 1X<br />
Software "...590101"<br />
Functional description<br />
Page 109 of 222
Change language