Master Control - Berker

4.2.4.5.2 Specifying light scene values
When all the light scenes and light scene groups have been created in the ETS plug-in and the
group addresses have been assigned to the objects, commissioning can take place. During first
commissioning (programming operation by the ETS or the plug-in) the light scene names, the
groups and the values saved in the panel must be overwritten (see chapter 4.2.4.1.4. Download
behaviour).
After commissioning, the light scene values can be edited directly on the panel - either by the installation
engineer or the panel operator. In addition the light scene names can be modified at
any time. The light scenes (light scene text) and light scene groups (light scene values) can be
edited on the light scene pages (see picture 21). The light scene pages are system pages,
which can be opened using the Open page command.
Order-No. 7574 00 1X
picture 21: Light scene page
Software "...590101"
Functional description
The function buttons of the light scene pages can be used to open the following functions...
- Button 1 "Open / Save": pressing the button briefly opens the currently highlighted scene.
Pressing it for longer (longer than 5 seconds) saves new values for the current light scene.
- Button 2 "Change light scene": opens the light scene groups, in order to edit light scene
values (see below).
- Button 3 "Change text": allows modification of the predefined light scene designations in
the ETS plug-in (light scene text) and thus adjustment to the requirements of the user. The
light scene text can be entered using the on-screen keyboard.
- Button 4 "Back": return to the page from which the light scene page was opened.
The light scene values (switching or value) can be edited on the light scene group page. The
light scene group pages (see picture 22) are opened by pressing button 2 "Change scene" on
the light scene pages.
Page 85 of 222