Master Control - Berker

i In 12 hour time display format, the switching times for sunrise and sunset apply in the same
way. Times between 12:00 AM and 11:59 AM are evaluated as sunrise and times between
12:00 PM and 11:59 PM as sunset.
Random function
The switching times of a channel can be triggered offset in a set random period. The random
function can be activated separately for each timer switch channel and affects all the switching
times of the appropriate channel.
Each day at 0:00, the panel calculates a time offset individually and randomly for each switching
time, by which a switching time is brought forward minute-by-minute (-) or is set back (+). The
maximum time offset between the set switching time and the actual time of the version can be
configured in the ETS plug-in for each timer switch channel using the parameter "Max. time offset
+/-". This allows time offsets of between 1 and 30 minutes. The setting "0" for the time offset
completely deactivates the random function for the timer switch channel. The panel randomly
determines a time from the configured maximum time offset and adds this time either to the set
switching time or, alternatively, subtracts it from the switching time.
i It is not possible to transfer the switching times into the previous or next day using the time
offset, i.e. the random function does not extended beyond the ends of days. If a randomly
calculated time offset of a switching time go beyond the end of a day, then the random
function for the affected switching time is not executed. The same applies when the random
time offset affects other switching times in the timer switch channel. When using the
random function to specify the switching times of a channel, care should be taken that the
individual switching times are apart by at least +/- the maximum time offset, as configured
in the ETS plug-in.
Example: maximum time offset = +/- 30 minutes, one switching time set to 11:00, random
function active -> other switching times of the channel may be between 0:00 ... 10:30 and
11:30 ... 23:59 (and in the same way for the 12 hour display format). The same applies to
additional switching times with a random function.
i If, in addition to the random function, an astro function is also activated, then the following
prioritisation applies to the calculation of the switching time:
1. Astro time complying with "Not before" / "At the latest"
2. The random time is added or subtracted to the time calculated under 1.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 93 of 222