Master Control - Berker

4.2.4.15 Group addresses
On starting, the plug-in transfers all the currently defined group addresses from the ETS project
database and display them in the tree structure in the "Group addresses" node. In addition, the
plug-in can also use "internal group addresses", which are not transmitted to the bus. Internal
group addresses can be created using the context menu in the node of the same name.
Group addresses and internal group address can be linked to the communication objects in the
same way using mouse by "drag and drop" or using the context menu (click the right mousebutton
on a communication object). If the connection is to be created using the context menu, a
dialog opens in which a group address can be created.
The use of internal group addresses is advisable when, for example, the output of a timer switch
should only be connected to the control input of a multiplexer and no telegram is to be transmitted
to the bus.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 139 of 222