Master Control - Berker

More documents

Recommendations

Info

3 Technical data General Mark of approval KNX / EIB Storage/transport temperature -25 ... +75 °C (Storage above + +45 °C reduces the lifetime.) Ambient temperature -5 ... +45 °C Fixing type Installation in Flush-mounted box (e.g. small distribution board, etc.) Dimensions WxHxD approx. 220x140x48mm (without design frame) Terminals for mains supply Connection mode Screw terminal single stranded 0.5 ... 2.5 mm² finely stranded with conductor sleeve 0.5 ... 1.5 mm² finely stranded without conductor sleeve 0.5 ... 2.5 mm² External supply Rated voltage AC 230 V ~ Mains frequency 50 / 60 Hz Power consumption approx. 13.8 W Standby power approx. 5 W KNX / EIB supply KNX medium TP 1 Commissioning mode S mode Rated voltage KNX DC 21 V ... 32 V SELV Current consumption KNX max. 10 mA Connection mode KNX Terminal USB Number 1 Version: 2.0 Connection Type B Ethernet Number 1 Type 10 MBit/s Ethernet Connection RJ45-socket 8/4-pin Protocols TCP/IP, IMAPv4, POP3, SMTP DHCP possible (set to active at the factory), AutoIP Internal clock module (RTC) Power reserve min. 12 hours Rate deviation
4 Software description 4.1 Software specification ETS search paths: Displays / Tableau / Master Control BAU used: TPUART + µC KNX/EIB type class: 3g device with cert. PhL + stack + µC Configuration: S mode with plug-in PEI type: "0A"Hex / "10" Dec PEI connector: No connector Application program: No. Short description Name Version from screen version 1 Panel with coloured touch display. Master Control 590101 Order-No. 7574 00 1X Software specification 0.1 701 Page 15 of 222
Page 1 and 2: Master Control Issue: 23.10.2008 13
Page 3 and 4: 4.2.4.10.2 Datalogger display .....
Page 5 and 6: 1.3 Accessories Flush-mounting box
Page 7 and 8: 2.2 Device components Order-No. 757
Page 9 and 10: o Insert the device in the installa
Page 11 and 12: device parameter view in the ETS. T
Page 13: - Operating elements are used for n
Page 17 and 18: - Up 24 light scenes with a total o
Page 19 and 20: 4.2.3 Object table Number of commun
Page 21 and 22: Function: Date / time request by ex
Page 23 and 24: Function: Value function Object h F
Page 25 and 26: Function: Restraint function Object
Page 27 and 28: Function: Fault message Object h Fu
Page 29 and 30: Function: Multiplexer Object h Func
Page 31 and 32: Objects for presence simulation Fun
Page 33 and 34: Function: Signalling system Object
Page 35 and 36: Function: Signalling system Object
Page 37 and 38: 4.2.4 Functional description Introd
Page 39 and 40: The individual screen pages and the
Page 41 and 42: 16 characters. The box can also be
Page 43 and 44: 4.2.4.1.3 Date and time The panel p
Page 45 and 46: 4.2.4.1.4 Download behaviour After
Page 47 and 48: 4.2.4.1.6 Image list The panel can
Page 49 and 50: 4.2.4.1.7 Preview and resource moni
Page 51 and 52: The largest area is the Content are
Page 53 and 54: Service page, version 57 Service pa
Page 55 and 56: Display function The settings in th
Page 57 and 58: Order-No. 7574 00 1X picture 12: Da
Page 59 and 60: Order-No. 7574 00 1X picture 13: Te
Page 61 and 62: The parameters of the display eleme
Page 63 and 64: carried out. There is an automatic
Page 65 and 66:
4.2.4.2.4 Copying display elements
Page 67 and 68:
4.2.4.3 Service page 4.2.4.3.1 Stru
Page 69 and 70:
- Service address: an address can b
Page 71 and 72:
Text displayed in the history Meani
Page 73 and 74:
IP ID code Meaning 0x40 e-mail test
Page 75 and 76:
4.2.4.3.4 Passwords The passwords a
Page 77 and 78:
tem) helps. Here, allocations of IP
Page 79 and 80:
4.2.4.4 Fault messages Fault messag
Page 81 and 82:
4.2.4.4.2 Acknowledgement and messa
Page 83 and 84:
4.2.4.5 Light scene function Introd
Page 85 and 86:
4.2.4.5.2 Specifying light scene va
Page 87 and 88:
4.2.4.6 Timer switch function Timer
Page 89 and 90:
4.2.4.6.2 Setting switching times T
Page 91 and 92:
Order-No. 7574 00 1X picture 26: Wi
Page 93 and 94:
i In 12 hour time display format, t
Page 95 and 96:
4.2.4.8 Logical links The panel has
Page 97 and 98:
4.2.4.9 Multiplexer The panel has t
Page 99 and 100:
4.2.4.10 Datalogger Introduction Th
Page 101 and 102:
It should always be noticed that al
Page 103 and 104:
4.2.4.10.2 Datalogger display The d
Page 105 and 106:
4.2.4.11 Presence simulation Introd
Page 107 and 108:
i During the recording phase, chang
Page 109 and 110:
start delay is displayed in the sta
Page 111 and 112:
i External switching units are comp
Page 113 and 114:
A distinction is made between the f
Page 115 and 116:
4.2.4.12.2 Detector Detector types
Page 117 and 118:
The following events are shown summ
Page 119 and 120:
4.2.4.12.3 Arming Arming/unarming t
Page 121 and 122:
- "Arming acknowledgement": This ob
Page 123 and 124:
Subsequent alarm If an additional d
Page 125 and 126:
4.2.4.12.6 Event memory The signall
Page 127 and 128:
4.2.4.13 e-mail messages 4.2.4.13.1
Page 129 and 130:
Order-No. 7574 00 1X picture 39: Sy
Page 131 and 132:
General information on e-mail text
Page 133 and 134:
Sending the data values of the data
Page 135 and 136:
4.2.4.14.2 Displaying RSS newsfeeds
Page 137 and 138:
Order-No. 7574 00 1X picture 44: Di
Page 139 and 140:
4.2.4.15 Group addresses On startin
Page 141 and 142:
4.2.5 Parameters Description Values
Page 143 and 144:
Status poll delay after start (x 5
Page 145 and 146:
Basic brightness Off Dark Light h D
Page 147 and 148:
Request date / time No Yes Request
Page 149 and 150:
Wallpaper No presetting Pressing ".
Page 151 and 152:
Vertical icon alignment Top Centred
Page 153 and 154:
Value alignment Left-align Centred
Page 155 and 156:
For "Blind" display function... Sta
Page 157 and 158:
Order-No. 7574 00 1X with plus/minu
Page 159 and 160:
Upper limit value No Yes Order-No.
Page 161 and 162:
For "Date" display function... Sour
Page 163 and 164:
Curve 1 / 2: Datalogger channel Cur
Page 165 and 166:
Y axis Min. axis scaling Y axis Max
Page 167 and 168:
Value alignment Left-align Centred
Page 169 and 170:
Icon for frost / heat protection Ic
Page 171 and 172:
Image text for 1 'Capacitive' Image
Page 173 and 174:
Order-No. 7574 00 1X on the screen.
Page 175 and 176:
Order-No. 7574 00 1X to "0...100 %"
Page 177 and 178:
Time base between switching and dim
Page 179 and 180:
h Service page -> Area 1 Order-No.
Page 181 and 182:
Event display image text on Bit = 1
Page 183 and 184:
For "ASCII text" function... Length
Page 185 and 186:
Switching time x (x = 1...8) Order-
Page 187 and 188:
In case of fault message, blockage
Page 189 and 190:
Enter 'Departing' Yes No Enter 'Ack
Page 191 and 192:
Blocking object available Behaviour
Page 193 and 194:
Order-No. 7574 00 1X DPT 5,001 …
Page 195 and 196:
Order-No. 7574 00 1X sponse telegra
Page 197 and 198:
Contents (max. 60 characters) Recip
Page 199 and 200:
Internal arming via the signal page
Page 201 and 202:
Alarm delay time, external [s] Prea
Page 203 and 204:
Heading [Light scene group - Page 1
Page 205 and 206:
Creating a new project file If a pa
Page 207 and 208:
- "IP" tab The IP communication par
Page 209 and 210:
i The project file is temporary and
Page 211 and 212:
(8 bit values) for easier comprehen
Page 213 and 214:
Settings If the "IP" item is opened
Page 215 and 216:
Mailbox poll: The panel cyclically
Page 217 and 218:
i The set RSS newsfeed parameters a
Page 219 and 220:
i The panel can only be operated re
Page 221 and 222:
Objects for datalogger .. .........
show all

Master Control - Berker

Create successful ePaper yourself

Delete template?

Save as template?