Master Control - Berker

Order-No. 7574 00 1X
sponse telegram (ValueResponse) to
the panel. The "Read" flag must be set
on the transmitting object of the data
source for this to function correctly.
Poll interval * The polling interval of the cyclic object
poll can be set here.
This parameter is only visible on "Poll
object cyclically = Yes".
Send e-mail Yes
No
e-mail address of the
recipient
(max. 58 characters)
i *: The setting options automatically
align themselves to the configured
recording period and the resulting
time periods. This ensures that at
least one data value is requested
within a time period.
If the panel is connected to a network
via an Ethernet connection and an email
mailbox is configured to send email
messages, the data values recorded
by a datalogger channel can be
send cyclically by e-mail. In this case,
the panel prepares the data in a CSV file
and sends it to a specified recipient in a
standard e-mail.
No presetting The e-mail address of the recipient of
the automatically generated datalogger
e-mail message must be configured
here. The input format of the address is
specified as
"local@domain" (example: "xxx@yyy.de").
The address may be a maximum of
58 characters in length.
This parameter is only visible on "Send
e-mail = Yes".
h Presence simulation -> [Recording object designation]
Designation [Recording object] Predefined designation, which only appears
in the parameter node name and
which can be modified as necessary.
Data type DPT 1,001 (1 bit switching)
h e-mail
Password level for main
e-mail page
DPT 5,001 … 5,004 (1 byte
relative value)
No password protection
Password level 1
Password level 2
Software "...590101"
Parameters
The data type of a recording object of
the presence simulation can be set here.
If a password level is set here, then the
user must enter the correct password to
open the main e-mail page, if the previ-
Page 195 of 222