Master Control - Berker

This allows lighting top be switched at a switching time, a blind to be moved, a light scene to be
opened or the mode of a room temperature controlled to be influenced. The additional setting
options and communications objects of the named switching channel function primarily correspond
to the those of the display elements (see chapter 4.2.4.2.2. Display elements).
According to the selected switching channel, four function buttons can also be shown on the
bottom edge of the screen on each of the two timer switch pages. The following settings can be
selected for these function buttons...
- "No function" (function button inactive)
- "Change timer switch setting for channel". This function is the default setting for button 1
and can only be used in each channel.
- "Open page". This function is the default setting for button 4. There can be either a jump
back or a jump to any screen page created by the user. Other system pages are not
jumped to at this point.
- Execution of a manual operating function, depending on the type of the timer switch channel.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 88 of 222