Master Control - Berker

4.2.4.1.4 Download behaviour
After commissioning, the operator can make various settings directly on the panel while the system
is running. These include the names and settings of light scenes, switching times and limit
values.
During first commissioning of a device with new project planning data, these parts must be overwritten.
For this, set the parameters "Overwrite light scene names, delete values", "Overwrite all
timer switch switching times" and "Overwrite limit values" to "Yes". These parameters are located
in the "Download behaviour" parameter group of the ETS plug-in.
After first download, the parameters can be reset to "No" to maintain any changes made by the
user in subsequent programming operations.
Exceptions: with later project planning changes, the parameters must be set to "Yes" after
changes, so that the changes are transferred correctly to the device memory of the panel.
- Light scenes added or deleted
- Light scene groups added or deleted
- Sequence of light scenes changed
- Type of light scene groups (communication objects) changed
- Timer switch channels added or deleted
- Sequence of timer switch channels changed
- Function of the timer switch channels (type of communication objects) changed
- Value display (EIS type, data point type) of a monitored value changed
- Value monitoring activated or deactivated
- Top or bottom limit value activated or deactivated
- Numeric value of a limit value changed.
i The parameter "Overwrite all switching times of the timer switch" should be set to "Yes", if
the switching times predefined in the ETS plug in should be reloaded into the panel after
each programming operation.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 45 of 222