Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Text for line 2 No presetting Two lines of text are available to display<br />
the button function of a timer switch<br />
channel, which are positioned horizontally<br />
in the function button shown on the<br />
screen. The second line of the display<br />
text is specified here.<br />
X position for line 2 0 This parameter specifies the X position<br />
of the second line of the button text.<br />
h Timer switch -> Timer switch Page x of 2 (x = 1, 2) -> [Channel designation] - [Channel function]<br />
-> [Button designation] - [Button function] -> Function<br />
Function No function<br />
Order-No. 7574 00 1X<br />
Switching function of the<br />
display element<br />
Value display of the display<br />
element<br />
Light scene of the display<br />
element<br />
Operating mode switch of<br />
the display element<br />
Change timer switch setting<br />
for channel<br />
Open page<br />
h Fault messages -> [Fault message designation] -> General<br />
Depending on the function of the timer<br />
switch channel, a channel button can<br />
assume different operating functions. If<br />
the button function directly refers to the<br />
timer switch channel, the objects of the<br />
channel are used.<br />
A predefined screen page opens to<br />
change the timer switch settings for the<br />
channel. The page opening is preset as<br />
a return. A page must also be created<br />
here in the tree structure before it can<br />
be opened.<br />
This parameter presetting depends on<br />
the channel button number. The additionally<br />
visible parameters, which are<br />
dependent on the selection, correspond<br />
to the functions of the normal function<br />
buttons (see parameter description of<br />
the function buttons).<br />
Designation [Fault message] Predefined designation, which only appears<br />
in the parameter node name and<br />
which can be modified as necessary.<br />
Activation by object<br />
value<br />
0 telegram<br />
1 telegram<br />
This parameter defines upon which object<br />
value the fault message is activated.<br />
The inverted object value exits the fault<br />
message.<br />
Text of fault message No presetting A text can be entered here, which is displayed<br />
both in the message window<br />
and, if required, is logged in the message<br />
list.<br />
Acoustic signal Yes<br />
No<br />
Software "...590101"<br />
Parameters<br />
The piezo buzzer can be enabled here<br />
to signal the fault message acoustically.<br />
Page 186 of 222
Change language