You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Function: Signalling system<br />
Object<br />
h<br />
Function<br />
Signalling system output<br />
Order-No. 7574 00 1X<br />
Name<br />
Unarming acknowledgement<br />
Type<br />
1 bit<br />
DP type<br />
1,001<br />
Description 1 bit object to signal that the signalling system was unarmed internally or externally.<br />
The object is dynamic, meaning that it is only "1" for the unarming acknowledgment<br />
period specified in the ETS. In the armed state or if the unarming<br />
acknowledgment time has elapsed, the object value is "0".<br />
For example, appropriate pulse blocking elements can be connected to this<br />
signal output.<br />
Function: Signalling system<br />
Object<br />
h<br />
Function<br />
Signalling system output<br />
Name<br />
Fault<br />
Type<br />
1 bit<br />
DP type<br />
1,001<br />
Description 1 bit object for signalling a fault within the signalling system (missing detector,<br />
active sabotage input).<br />
0 = No fault / 1 = Fault.<br />
Function: Signalling system<br />
Object<br />
h<br />
Function<br />
Signalling system output<br />
Name<br />
Alarm detector text<br />
Type<br />
14 byte<br />
DP type<br />
16,001<br />
Description 14 byte object to transfer a 14 character detector text to the bus. If there is an<br />
alarm, the signalling system sends the signal text of the detector triggering the<br />
alarm to the bus via this object. The detector text can be configured separately<br />
for each detector in the ETS.<br />
Function: Signalling system<br />
Object<br />
h<br />
Function<br />
Signalling system output<br />
Name<br />
Fault detector text<br />
Type<br />
14 byte<br />
DP type<br />
16,001<br />
Description 14 byte object to transfer a 14 character detector text to the bus. If there is an<br />
alarm, the signalling system sends the signal text of the detector which caused<br />
the fault (missing detector) to the bus via this object. The detector text can be<br />
configured separately for each detector in the ETS.<br />
Function: Signalling system<br />
Object<br />
h<br />
Function<br />
Signalling system output<br />
Name<br />
Prealarm signalling,<br />
internal<br />
Type<br />
1 bit<br />
Software "...590101"<br />
DP type<br />
1,001<br />
Object table<br />
Description 1 bit object to signal an elapsing prealarm with internal arming. In the case of<br />
previously detected break-in of sabotage alarm, this signal output is "1" for the<br />
length of the alarm delay time configured in the ETS. Otherwise the object<br />
value is "0".<br />
Flag<br />
C, T<br />
Flag<br />
C, T<br />
Flag<br />
C, T<br />
Flag<br />
C, T<br />
Flag<br />
C, T<br />
Page 35 of 222