Master Control - Berker

Time base between
switching and dimming
Time factor between
switching and dimming
For "Blind" button function...
Order-No. 7574 00 1X
10 ms
100 ms
1 s
Blind function Up
Down
Toggle
Time base between
short/long-time operation
Time factor between
short/long-time operation
This parameter specifies the time base
for the time from which the panel detects
long actuation to transmit a dimming
telegram. For improved accuracy, we recommend
selecting a small time base
with a large time factor.
0...6...127 This parameter specifies the time factor
for the time from which the panel detects
long actuation to transmit a dimming
telegram. For improved accuracy, we recommend
selecting a small time base
with a large time factor.
10 ms
100 ms
1 s
Slat adjust time, basic 10 ms
100 ms
1 s
The blind command specified here is executed
for as long as the button is held
down.
This parameter specifies the time base
for the time from which the panel detects
long actuation. For improved accuracy,
we recommend selecting a small time
base with a large time factor.
0...3...127 This parameter specifies the time factor
for the time from which the panel detects
long actuation. For improved accuracy,
we recommend selecting a small time
base with a large time factor.
This parameter specifies the time base
for the time required for complete rotation
of the slats. For improved accuracy,
we recommend selecting a small time
base with a large time factor.
Slat adjust time, factor 0...6...127 This parameter specifies the time factor
for the time required for complete rotation
of the slats. For improved accuracy,
we recommend selecting a small time
base with a large time factor.
For "Value" button function...
Value display DPT 9.001 … 9.021 (2 byte
value)
DPT 5,001 … 5,004 (1 byte
Software "...590101"
Parameters
Defines the value range and the data
format of the corresponding communication
object.
Page 177 of 222