Master Control - Berker

Display function
The settings in the "Function" parameter group of a display element specify whether one or
more communication objects belong to the display element and which information it can display
in addition to its text or element icon. Depending on the configured function, text values or, alternatively,
status icon can be displayed as the element status. The status text or icon display
can be positioned anywhere in a horizontal direction (X position / user-defined or predefined) in
the area of the display element. The vertical Y position of the status text display corresponds to
the vertical text direction of the display element, the vertical Y position of the status icon display
is always defined as centred.
The following display functions can be assigned to a display element...
Text display:
A display element with the "Text display" function does not contain any communication objects
or any further settings.
Only the display text or the element icon is displayed, without any operating function, in the element.
Switching:
A display element with the "Switching" function possesses a 1 bit communication object.
It can either display the status of this object as a display text or as an icon.
Dimming:
A display element with the "Dimming" function possesses either a
1 bit and 4 bit communication object or, alternatively, a 1 byte communication object.
The element dimming state can either show a display text or an icon for the dimming switching
state when using the 1 bit and 4 bit object. It can either display the dimming value of the 1 byte
object as text or as a bar graph.
If the display element is also to be used as an operating element, it is necessary, to adjust the
parameters in the display to make a distinction between switching (brief actuation) and dimming
(long actuation).
Blind:
A display element with the function "Blind" possesses two 1 bit communication objects for longtime
operation and short-time operation of a blind, roller shutter or awning (or similar structures).
It can either display the value of the "Long-time operation" object as a display text or as an icon.
When a short-time telegram is received, the position, e.g. of a blind or roller shutter drive, is not
defined. In such a case, dashes "----" are displayed in the element as the status.
If the display element is also to be used as an operating element, it is necessary, to adjust the
parameters in the display to make a distinction between lamella adjustment (brief actuation) and
movement (long actuation).
Value:
A display element with the "Value" function possesses a communication object whose value
(1 byte, 2 byte, 4 byte) is set using the "Value display" parameter.
Counter values with the data point types 5,010, 6,010, 7,001, 8,001, 12,001, 13,001, floating
point values with the data point types 9,001 … 9,021, 14,000 … 14,079 or relative values with
the data point types 5,001 … 5,004 can be used. In the telegrams to the bus, a purely numeric
value is transmitted without a unit.
The units of the standardised data point types may not correspond to the form required for the
display. Therefore, there are various adjustment options available depending on the set type of
"Value display"...
The numerical values can be converted with the two parameters "Offset" and "Reinforcement".
This displayed value equals the received value multiplied by the reinforcement plus the offset.
The parameter "Format" can be used to define the number of valid digits and the amount of
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 55 of 222