Master Control - Berker

4.2.4.16 Options of the ETS plug-in
The project planning and programming of the panel takes place using the ETS with the installed
plug-in. This plug-in gives the project planner various options, which can be opened in the menu
under "Setting -> Options".
Table:
The "Table" tab can be used to set various options, which affect the tables on the right-hand
side of the plug-in project planning desktops. These can be changed according to personal
taste.
Options:
The "Options" tab can be used to specify at which intervals the plug-in saved modified data to a
backup file (Auto Save file). A backup file can be created independently of this using the
"Device" menu.
The option "Automatically assign page / Display element designation" specifies whether, when
the designation of an element is changed, the text shown on the screen is changed automatically.
In addition, the saved data can be checked for internal contradictions or other errors. This
database test only comprises the data processed by the project planning software. This does
not affect the ETS database.
The settings under the item "Speed optimisation" specify whether the project software should
save your data to the ETS database or to a separate file. In particular, when using wallpapers,
the use of a separate file can increase speed considerably. However, these separate files but
be copied manually during a data backup or on transferring the project data to another PC.
These options can only be set in conjunction with the ETS 3. In ETS2, the project planning data
is always saved to a separate file.
Hardware:
The values in the fields "Firmware version" and "Firmware file" are solely for information purposes.
If necessary, the project planning software automatically loads the current firmware to
the panel. During commissioning, the PC first determines which data is currently loaded in the
device. To keep the programming time as short as possible, only the changed data is transferred.
The option "Transfer all on next download" loads the complete application without any
time optimisation. This may increase the time required for commissioning considerably. It is
should not be necessary to activate these options. If problems occur during commissioning, it
may be possible to solve them with this option.
Display elements:
The options on the "Display elements" tab allow standardised positioning and design of the display
elements when creating your own screen pages.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 140 of 222