Master Control - Berker

- "Arming acknowledgement":
This object dynamically signals successful internal or external arming for the length of the
"Arming acknowledgement time" set in the ETS plug-in. No distinction is made between the
security areas. The object value switches to "1" as soon as the system has armed. The object
value returns to "0" automatically when the arming acknowledgement has elapsed. It is
possible to cancel arming acknowledgement by unarming before the arming acknowledgement
time has elapsed.
- "Unarming acknowledgement":
This object dynamically signals successful internal or external unarming for the length of
the "Unarming acknowledgement time" set in the ETS plug-in. No distinction is made
between the security areas. The object value becomes "1" as soon as the system has unarmed
(status change "Armed -> Unarmed" or "Alarm -> Unarmed after alarm"). When the
status changes from "Unarmed after alarm -> Unarmed", there is no unarming acknowledgement.
The object value returns to "0" automatically when the unarming acknowledgement
has elapsed. It is possible to cancel unarming acknowledgement by arming before
the unarming acknowledgement time has elapsed.
i If, after an arming command (or after an arming delay has elapsed), the signalling system
does not arm, because the affected security areas are not ready to arm, there will be no acknowledgement.
In this case, the dynamic object "Arming acknowledgement" and, in the
case of external arming, the visual signal encoder are not controlled (no negative acknowledgement).
i To be able to distinguish between dynamic objects for arming and unarming, the acknowledgement
times for "Arming" and "Unarming" should be of different lengths. When arming
or unarming is repeated ("Armed" -> "Armed", "Unarmed" -> "Unarmed"), there is no retriggering
of the dynamic signalling. This is only transmitted once on changing status.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 121 of 222