Master Control - Berker

Order-No. 7574 00 1X
100 ms
1 s
1 min
This parameter is only visible on "Time
function, output = On delay" or "Time
function, output = ON delay and OFF
delay".
Switch-on delay factor 0...1...255 This parameter defines the time factor
for the switch-on delay.
This parameter is only visible on "Time
function, output = On delay" or "Time
function, output = ON delay and OFF
delay".
Switch-off delay basis 100 ms
1 s
1 min
This parameter defines the time base for
the switch-off delay.
This parameter is only visible on "Time
function, output = Off delay" or "Time
function, output = ON delay and OFF
delay".
Switch-off delay factor 0...1...255 This parameter defines the time factor
for the switch-off delay.
This parameter is only visible on "Time
function, output = Off delay" or "Time
function, output = ON delay and OFF
delay".
Blocking object available
Behaviour of blocking
object
Transmit after block enable
Yes
No
1 = enabled; /
0 = disabled
0 = enabled /
1 = disabled
Yes
No
h Logic -> Links -> [Logic gate designation] - [Type of the logic gate link]
The filtering/timer can also be fitted with
a blocking object. If the blocking object
is used, the timer ignores changes to the
input when the block is active.
The telegram polarity of the blocking object
can be set here.
This parameter is only visible on "Blocking
object available = Yes".
After the block, the current input value
can immediately be processed further
("Yes" setting), or the timer waits for the
next input telegram ("No" setting).
This parameter is only visible on "Blocking
object available = Yes".
Designation [Logic gate] Predefined designation, which only appears
in the parameter node name and
which can be modified as necessary.
Type of logic operation AND link
OR link
Software "...590101"
Parameters
This parameter defines the logical link
function.
Page 190 of 222