Master Control - Berker

Order-No. 7574 00 1X
cluded in the collective feedback, i.e. the
collective feedback of an actuator not
actually in the specified channel is evaluated,
then the image text defined at
this point is displayed.
This parameter is only visible with
"Status display = as text".
Icon for 'On' status No presetting When a channel is switched on, the icon
defined here is displayed.
This parameter is only visible with
"Status display = as icon".
Icon for 'Off' status No presetting When a channel is switched off, the icon
defined here is displayed.
This parameter is only visible with
"Status display = as icon".
Icon for 'Invalid' status No presetting If the channel specified in the "Channel
to be evaluated" parameter is not included
in the collective feedback, i.e. the
collective feedback of an actuator not
actually in the specified channel is evaluated,
then the icon defined at this point
is displayed.
This parameter is only visible with
"Status display = as icon".
Value alignment Left-align
Centred
Right-align
User-defined
This parameter defines the horizontal arrangement
of the status display within
the display element. In the "Userdefined"
setting, an additional parameter
is displayed for precise positioning.
X position of the value 1 The alignment of the status display within
a display element is specified here.
The settable value depends on the width
of the display element.
For "Dimmer actuator
load type" display function...
Status display
Image text for 0
'Undefined'
As text
As icon
Software "...590101"
Parameters
The load type can either be displayed by
an image text or a status icon.
[Undefined] If the load type of a dimmer actuator is
fed back as undefined, then the display
element will display the text defined
here.
This parameter is only visible with
"Status display = as text".
Page 170 of 222