Master Control - Berker

Overwrite all switching
times of the timer switch No
Yes
Overwrite limit values No
Yes
h Pages -> [Page designation] - [Page overview]
Order-No. 7574 00 1X
After commissioning, the operator can
make various settings directly on the
panel while the system is running.
These also include the switching times
of the internal timer switch. During first
commissioning of a device with new
project planning data, these parts must
be overwritten. For this, set the parameter
"Overwrite all switching times of the
timer switch" to "Yes". After first download,
the parameter can be reset to "No"
to maintain any changes made by the
user in subsequent programming operations.
i The parameter "Overwrite all
switching times of the timer switch"
should be set to "Yes", if the switching
times predefined in the ETS
plug in should be reloaded into the
panel after each programming operation.
After commissioning, the operator can
make various settings directly on the
panel while the system is running.
These also include the definitions of the
limit values. During first commissioning
of a device with new project planning
data, these parts must be overwritten.
For this, set the parameter "Overwrite
limit values" to "Yes". After first download,
the parameter can be reset to "No"
to maintain any changes made by the
user in subsequent programming operations.
Designation [Page] A page designation can be entered
here, which is only displayed in the tree
structure within the ETS plug-in.
Display heading No
Yes
A definition is set here as to whether the
page heading is displayed on the
screen.
Heading [Page] The page heading can be entered here
to be displayed on the screen. Only visible
on "Display heading = Yes".
Password level No password protection
Password level 1
Password level 2
Password level 3
Password level 4
Software "...590101"
Parameters
If a password level is set here, then the
user must enter the correct password to
open the page, if the previous page has
a lower password level.
Page 148 of 222