Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Password for PC Client<br />
software<br />
h LCD lighting<br />
LCD lighting Continuous operation<br />
On actuation<br />
On actuation or switching<br />
object<br />
LCD lighting length 1 min<br />
3 min<br />
5 min<br />
10 min<br />
15 min<br />
30 min<br />
LCD lighting on 0 telegram<br />
1 telegram<br />
Order-No. 7574 00 1X<br />
Software "...590101"<br />
Parameters<br />
opened via a 1 byte KNX/EIB object. If a<br />
page is to be opened using the object,<br />
this parameter must be set to "Yes. In<br />
this case the object "Open page" becomes<br />
visible.<br />
12345 The communication connection between<br />
the PC Client software and the panel is<br />
protected by a password. This parameter<br />
allows the input of a password of<br />
maximum 16 characters. The box can<br />
also be left empty meaning that communication<br />
between the PC Client software<br />
and the panel takes place without password<br />
protection.<br />
The password entered in the PC Client<br />
software and the panel must be identical.<br />
The password is encrypted in the<br />
communication connection, meaning<br />
that it is safe from sabotage.<br />
In the "Continuous operation" setting,<br />
the background lighting is switched on at<br />
maximum brightness. It cannot be<br />
switched, either via the device or the<br />
bus.<br />
In the "On actuation" setting, the background<br />
lighting is adjusted to the set basic<br />
brightness value when idle. This<br />
means that the background lighting may<br />
even be switched off. As soon as the<br />
device is operated, the lighting returns to<br />
maximum brightness. After the set "LCD<br />
lighting length" time, the backlighting returns<br />
to the set basic level of brightness.<br />
In the "On actuation or switching object"<br />
setting, the lighting is adjusted to the set<br />
basic brightness value when idle. When<br />
the touch screen is actuated or when a<br />
switching value is received via the<br />
"Lighting object" communication object,<br />
the lighting temporarily switches to maximum<br />
brightness for the configured<br />
"LCD lighting length". In addition, the<br />
backlighting can also be switched off at<br />
any time via the object.<br />
If the panel is not operated for longer<br />
than this time, the backlighting of display<br />
switches back to basic brightness.<br />
The telegram polarity of the "Lighting<br />
object" object is defined here.<br />
Page 144 of 222
Change language