Master Control - Berker

- Up 24 light scenes with a total of 32 actuator groups can be created. The light scenes are
set directly on the panel after commissioning.
- There are up to 80 logical links available, each with up to 8 inputs, up to 12 multiplexers
each with up to three channels and 40 timers with ON delay and OFF delay and a filter
function.
- Up to 50 different fault messages can be used. Of these fault messages, up to 20 can be
active simultaneously. Activation, acknowledgement and deactivation of fault messages
can be logged in a message list.
- A synchronisable real-time clock is available for setting up time switch functions and for
logging events. The events can be forwarded by a switching command using predefined emails.
- A presence simulation allows the recording or playing back of any simulations over specific
periods of time.
- A datalogger provides the option of recording data, received from the KNX/EIB, in various
formats, and displaying them on the unit. The data recorded by the datalogger can also be
forwarded by e-mail.
- If necessary, a signalling system can provide a security-orientated system to monitor doors
and windows. Up to two different signalling areas (internal / external) can be armed and
monitored for break-ins and sabotage. Thus visual and acoustic alarming is possible using
additional KNX/EIB components (e.g. switching actuators) in conjunction with alarm encoders
(flash light, internal siren).
- Project planning takes places with an ETS plug-in. Commissioning can take place both via
the ETS and via the plug-in. Programming via the plug-in can save considerable time on
account of the access to the internal USB interface of the panel.
Order-No. 7574 00 1X
Software "...590101"
Scope of functions
Page 17 of 222