You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Y axis<br />
Min. axis scaling<br />
Y axis<br />
Max. axis scaling<br />
Y axis<br />
Display axis labelling<br />
Y axis<br />
Axis labelling format<br />
Y axis<br />
Number of subdivisions<br />
Y axis<br />
Number of additional<br />
lines<br />
Order-No. 7574 00 1X<br />
0 The lower minimum value of the Y axis<br />
can be defined at this point. The value<br />
may be either positive or negative, but<br />
may not exceed the maximum value.<br />
During setting, it should be ensured that<br />
the expected datalogger values do not<br />
undershoot the minimum value. Otherwise<br />
the data value curve would be<br />
drawn vertically downward from the two<br />
neighbouring data points of the undershoot.<br />
This parameter is only visible on "Y axis:<br />
automatic scaling = No".<br />
100 The upper maximum value of the Y axis<br />
can be defined at this point. The value<br />
may be either positive or negative, but<br />
may not undershoot the minimum value.<br />
During setting, it should be ensured that<br />
the expected datalogger values do not<br />
exceed the maximum value. Otherwise<br />
the data value curve would be drawn<br />
vertically upward from the two neighbouring<br />
data points of the overshoot.<br />
This parameter is only visible on "Y axis:<br />
automatic scaling = No".<br />
Yes<br />
No<br />
The axis labelling of the Y axis can be<br />
shown or hidden. With axis labelling,<br />
only the subdivisions and additional<br />
lines are shown, but not the numeric values<br />
of the scale (minimum and maximum<br />
value).<br />
###.# This parameter can be used to specify<br />
the format of the displayed numeric values<br />
of the Y axis scale. Pressing "..."<br />
can set the format using an editor, using<br />
which the predefined standard format<br />
can be changed through manual inputs.<br />
This parameter is only visible on "Y axis:<br />
display axis labelling = No".<br />
1...10...20 The Y axis can be given subdivisions to<br />
simplify the legibility of the diagram. This<br />
parameter specifies the number of subdivisions.<br />
No additional lines<br />
Every subdivision<br />
Every other subdivision<br />
Subdivision in the centre<br />
Software "...590101"<br />
Parameters<br />
The entire diagram can be given additional<br />
horizontal lines, orientated to the<br />
Y axis, to improve legibility. This parameter<br />
specifies the number of additional<br />
lines according to the subdivisions.<br />
Page 165 of 222
Change language