You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Status poll delay after<br />
start (x 5 ms)<br />
Delay between status<br />
polls (x 5 ms)<br />
Delay between light<br />
scene outputs (x 5 ms)<br />
Transmit limit values on<br />
initialisation<br />
Order-No. 7574 00 1X<br />
50...60...1000 The waiting time is defined here until the<br />
panel to read out values of other communication<br />
objects during a status poll<br />
after initialisation. This parameter gives<br />
other devices time to initialise.<br />
10...20...100 The waiting time between individual<br />
panel status polls is defined here. This<br />
parameter helps to limit the bus load<br />
during initialisation.<br />
10...20...100 Here, the time is defined which the panel<br />
waits between the individual telegrams<br />
of a light scene. This parameter<br />
helps to limit the bus load when opening<br />
light scenes.<br />
No<br />
Yes<br />
System character set Eastern Europe (1250)<br />
Cyrillic (1251)<br />
Western Europe (1252)<br />
Greek (1253)<br />
Keyboard layout German (Germany)<br />
English (United Kingdom)<br />
Open page via object No<br />
Yes<br />
Software "...590101"<br />
Parameters<br />
In the "Yes" setting, the device transmits<br />
the statuses of the limit value objects, as<br />
soon as they have a valid value after initialisation.<br />
In the "No" setting, the device<br />
only sends the limit value objects on<br />
over or undershoots, i.e. when the appropriate<br />
value changes.<br />
In order to display texts in various languages<br />
on the screen, and, if necessary,<br />
input them, you need to set the character<br />
set (codepage) of the device and the<br />
assignment of the on-screen keyboard.<br />
This parameter specifies the character<br />
set used for all the system pages.<br />
In addition, each page created by the<br />
project planner can be configured separately<br />
with its own "character set". This<br />
configuration is then possible in each<br />
parameter node of a page. There the<br />
system character set ("System" setting)<br />
can also be used as a default setting, if,<br />
for example, the same character set is<br />
always used. However, it is also possible<br />
to used different character sets for<br />
pages.<br />
The parameter specifies the arrangement<br />
of various characters within the onscreen<br />
keyboard<br />
Each screen page of the panel (pages<br />
created by the project planner and, optionally,<br />
various system pages) can be<br />
Page 143 of 222
Change language