Master Control - Berker

X axis:
Display axis title
X axis:
Axis title
X axis:
Number of subdivisions
X axis:
Number of additional
lines
X axis:
Display axis labelling
For "Access check" display
function...
Order-No. 7574 00 1X
Yes
No
The X axis of the graphic display can be
described with a text. This parameter
defines whether the text description of
the X axis should be displayed in the
display element.
[X axis] The X axis title is specified here. This
parameter is only visible when the axis
title of the X axis is to be displayed.
1...10...60 The X axis can be given subdivisions to
simplify the legibility of the diagram. This
parameter specifies the number of subdivisions.
No additional lines
Every subdivision
Every other subdivision
Subdivision in the centre
Yes
No
Display Code number
Status byte
Bit of the status byte to
be displayed
Encryption info
Read direction
Authorisation
Error status
Image text for 1 Encrypted
L->R
Accepted
Error
Image text for 0 Normal
L->R
Not accepted
OK
Software "...590101"
Parameters
The entire diagram can be given additional
vertical lines, orientated to the
X axis, to improve legibility. This parameter
specifies the number of additional
lines according to the subdivisions.
The axis labelling of the X axis can be
shown or hidden. With axis labelling,
only the subdivisions and additional
lines are shown, but not the time or date
values.
This parameter defines which part information
of the communication objects
is to be shown in the display element.
A part of the part information of the
status byte can be selected here.
This parameter is only visible on "Display
= Status byte".
An image text must be defined for the
status bit here. Various image texts are
predefined, which can be modified, according
to the selected part information
of the status byte.
This parameter is only visible on "Display
= Status byte".
An image text must be defined for the
status bit here. Various image texts are
predefined, which can be modified, according
to the selected part information
Page 166 of 222