Master Control - Berker

Function: Signalling system
Object
h
Function
Signalling system input
Order-No. 7574 00 1X
Name
Sabotage
Type
1 bit
DP type
1,001
Description 1 bit object as a sabotage of the signalling system. The sabotage detector can
be connected to this object.
0 = No sabotage, detector inactive / 1 = Sabotage, detector active
Function: Signalling system
Object
h
Function
Signalling system output
Name
Ready to arm, internal
Type
1 bit
DP type
1,001
Description 1 bit object to signal that the signalling system is internally ready to arm. The
system is only internally ready to arm when none of the detectors allocated to
the external skin is active and there is no fault.
0 = Not ready to arm / 1 = Ready to arm
Function: Signalling system
Object
h
Function
Signalling system output
Name
Ready to arm, external
Type
1 bit
DP type
1,001
Description 1 bit object to signal that the signalling system is externally ready to arm. The
system is only externally ready to arm when none of the detectors allocated to
the internal skin and the external skin is active and there is no fault.
0 = Not ready for arming / 1 = Ready for arming
Function: Signalling system
Object
h
Function
Signalling system output
Name
Alarm
Description 1 bit object to signal a break-in or sabotage alarm.
0 = No alarm / 1 = Alarm
Function: Signalling system
Object
h
Function
Signalling system output
Name
Arming message,
internal
Type
1 bit
Type
1 bit
Software "...590101"
DP type
1,001
DP type
1,001
Object table
Description 1 bit object for static signalling that the signalling system has successfully
armed internally, i.e. the external skin monitoring is active.
0 = External skin monitoring not armed / 1 = External skin monitoring armed
Flag
C, S
Flag
C, T
Flag
C, T
Flag
C, T
Flag
C, T
Page 33 of 222