You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
For "ASCII text" function...<br />
Length of the ASCII text 1...14 This setting allows shortening of the received<br />
texts for the display.<br />
X position of the value 0 The alignment of the status text or icon<br />
within a status line is specified here. In<br />
the text display, the value should be set<br />
in such a way that multiple status elements<br />
in th status line do not overlap<br />
(different X position values). However,<br />
overlapping is always possible, e.g. in<br />
the display of different icons.<br />
This parameter presetting depends on<br />
the selected function of the status element.<br />
h Timer switch -> General<br />
Password level No password protection<br />
Password level 1<br />
Password level 2<br />
Password level 3<br />
Password level 4<br />
h Timer switch -> Location data<br />
Geographic longitude of<br />
the location<br />
Geographic latitude of<br />
the location<br />
Order-No. 7574 00 1X<br />
O 7.62°<br />
...<br />
Selection of the geographic<br />
position using the co-ordinates<br />
editor<br />
N 51.22°<br />
...<br />
Selection of the geographic<br />
position using the co-ordinates<br />
editor<br />
h Timer switch -> Timer switch Page x of 2 (x = 1, 2) -> General<br />
Heading [Timer switch - Page 1 of<br />
2]<br />
Software "...590101"<br />
Parameters<br />
If a password level is set here, then the<br />
user must enter the correct password to<br />
open the page, if the previous page has<br />
a lower password level.<br />
For the astro function of the timer switch<br />
to work correctly, the geographic position<br />
must be set. This parameter, together<br />
with the co-ordinate editor, defines<br />
the geographic position (longitude) of<br />
the installation location of the panel.<br />
For the astro function of the timer switch<br />
to work correctly, the geographic position<br />
must be set. This parameter, together<br />
with the co-ordinate editor, defines<br />
the geographic position (latitude) of the<br />
installation location of the panel.<br />
Predefined designation, displayed only<br />
in the parameter node name of the timer<br />
switch page and which can be modified<br />
as necessary. This parameter is available<br />
on each timer switch page (1, 2).<br />
h Timer switch -> Timer switch Page x of 2 (x = 1, 2) -> [Channel designation] - [Channel function]<br />
-> General<br />
Page 183 of 222
Change language