Master Control - Berker

Icon for 0 No presetting Here, an icon can be configured using
the image list to be displayed in the display
element on status "0" (switched
off).
This parameter is only visible with
"Status display = as icon" and "Display =
switching state".
Time base between
switching and dimming
Time factor between
switching and dimming
Order-No. 7574 00 1X
10 ms
100 ms
1 s
Value display type 0 … 100%
0 … 255
Status display As value
As bar graph
Value alignment Left-align
Centred
Right-align
User-defined
Software "...590101"
Parameters
This parameter specifies the time base
for the time from which the panel detects
long actuation for dimming. For improved
accuracy, we recommend selecting
a small time base with a large time
factor.
This parameter only has a function when
the function "Dimming function of the
display element" has been selected for
function button 1.
0...6...127 This parameter specifies the time factor
for the time from which the panel detects
long actuation for dimming. For improved
accuracy, we recommend selecting
a small time base with a large time
factor.
This parameter only has a function when
the function "Dimming function of the
display element" has been selected for
function button 1.
The display of the numeric value is displayed
here.
This parameter is only visible on "Display
= Brightness value".
The status can either be displayed as a
numeric value or as a bar diagram.
Only visible on "Display = Brightness
value".
This parameter defines the horizontal arrangement
of the status text, value or
icon within the display element. In the
"User-defined" setting, an additional
parameter is displayed for precise positioning.
X position of the value 1 The alignment of the status text, value
or icon within a display element is specified
here. The settable value depends
on the width of the display element.
Page 154 of 222