Master Control - Berker

Operating mode switch
via
Status display As text
As icon
Order-No. 7574 00 1X
Individual objects (1bit)
Connex
The operating mode can be selected using
four different 1 bit objects or a
shared 1 byte connex object. Different
communication objects are displayed
according to this setting.
The operating mode can either be displayed
by an image text or a status icon.
Text for Comfort mode No presetting An image text can be configured here
for active comfort operation.
This parameter is only visible with
"Status display = as text".
Text for
standby operation
No presetting An image text can be configured here
for active standby operation.
This parameter is only visible with
"Status display = as text".
Text for night reduction No presetting An image text can be configured here
for active night reduction.
This parameter is only visible with
"Status display = as text".
Text for
frost / heat protection
Text for
automatic operation
Icon for
comfort operation
Icon for
standby operation
Software "...590101"
Parameters
No presetting An image text can be configured here
for active frost/heat protection.
This parameter is only visible with
"Status display = as text".
No presetting An icon can be configured here for active
automatic operation.
This parameter is only visible with
"Status display = as text" and "Operating
mode switch via = Connex".
No presetting An icon can be configured here for active
comfort operation.
This parameter is only visible with
"Status display = as icon".
No presetting An icon can be configured here for active
standby operation.
This parameter is only visible with
"Status display = as icon".
Icon for night reduction No presetting An icon can be configured here for active
night reduction.
This parameter is only visible with
"Status display = as icon".
Page 168 of 222