Master Control - Berker

Order-No. 7574 00 1X
on the screen. The second line of the
display text is specified here.
Function buttons assigned to a display
element only appear on the screen if
two-click operation was configured.
X position for line 2 0 This parameter specifies the X position
of the second line of the button text.
h Page -> [Display element designation] - [Display element function] -> [Button designation] -
[Button function] -> Function
Function No function
For "Switching function
of the display element"
button function...
Switching function of the
display element
Dimming function of the
display element
Blind function of the display
element
Value display of the display
element
Restraint function of the
display element
Operating mode switch of
the display element
Switching
Blind
Dimming
Value
Light scene
Restraint
Open page
Function on actuation No function
On
Off
Toggle
Function on release No function
On
Software "...590101"
Parameters
Depending on the function of the display
element, an appropriate function button
can assume different operating functions.
Some of the functions are not
available for all the display elements. If
the button function refers to the display
element directions (setting "... of the display
element), the objects of the display
element are used. Otherwise separate
objects are shown for the button. In this
case, the function button works independently.
The switching command specified here
is executed for as long as the button is
held down.
The switching command specified here
is executed when a button is released.
Page 173 of 222