Master Control - Berker

Value alignment Left-align
Centred
Right-align
User-defined
Order-No. 7574 00 1X
ceived texts for the display.
This parameter defines the horizontal arrangement
of the text display within the
display element. In the "User-defined"
setting, an additional parameter is displayed
for precise positioning.
X position of the value 1 The alignment of the text display within
a display element is specified here. The
settable value depends on the width of
the display element.
For "Datalogger display"
display function...
Value alignment Left-align
Centred
Right-align
User-defined
This parameter defines the horizontal arrangement
of the graphic display within
the display element. In the "Userdefined"
setting, an additional parameter
is displayed for precise positioning.
i The diagram size (graphic display)
is directly affected by the size of the
display element. Here, the minimum
size should be maintained, according
to the information shown and
the scaling of the axes. If the minimum
size is undershot, then it will
not be possible to show the diagram
on the panel display. In this
case, the appropriate display element
is filled with a cross.
X position of the value 1 The alignment of the graphic display
within a display element is specified
here. The settable value depends on the
width of the display element.
Display diagram heading
Yes
No
The datalogger diagram can be overwritten
with text within the display element.
The decision to display the heading or
not is taken here.
Diagram heading [Heading] The heading of the datalogger diagram
in the display element is specified here.
This parameter is only visible when the
heading is to be displayed.
Display legend Yes
No
Software "...590101"
Parameters
A datalogger diagram can display the
measured values of up to two datalog-
Page 162 of 222