Master Control - Berker

Order-No. 7574 00 1X
ible, then additional buttons of the element
can be operated after clicking the
display element and automatic execution
of the function of button 1.
This parameter is only visible on "Element
selectable = Yes" and "Touch operation
= One-click operation".
h Page -> [Display element designation] - [Display element function] -> Function
Function display Text display
Switching
Dimming
Blind
Value
Light scene
Date
Time
ASCII text
Datalogger display
Access check
Restraint
Operating mode switch
Collective feedback
Dimmer actuator load type
For "Switching" display
function...
Status display As text
As icon
Software "...590101"
Parameters
Specification of the display function of a
display element. Depending on this setting,
additional parameters and, if possible,
additional communication objects
are displayed.
With the "Text display" setting, the display
element is only used to display a
static text or an icon on the screen.
The display element can display either
texts of status images from the image
list to display the status.
Image text for 1 [On] Here, the text can be entered to be displayed
in the display element on status
"1" (switched on).
This parameter is only visible with
"Status display = as text".
Image text for 0 [Off] Here, the text can be entered to be displayed
in the display element on status
"0" (switched off).
This parameter is only visible with
"Status display = as text".
Icon for 1 No presetting Here, an icon can be configured using
the image list to be displayed in the display
element on status "1" (switched
on).
This parameter is only visible with
"Status display = as icon".
Icon for 0 No presetting Here, an icon can be configured using
the image list to be displayed in the dis-
Page 152 of 222