Master Control - Berker

4.2.4.2.3 Status line
On each screen page, the visibility of the status line on the top edge of the screen can be
switched on or off. The structure of the status line is the same on every page. Up to
10 status elements can be created in the status line. The individual elements are centred vertically
in the status line. The horizontal positions of the individual status elements can be specified
individually. The preview window of the ETS plug-in can be used to check that the status elements
do not overlap.
The following functions can be selected for the individual status elements...
- Event display
- Collective fault message
- Value display
- Date
- Time
- ASCII text
The collective fault message shows that at least one error fault message is active. An "Event
display" status element corresponds to a display element with the function "Switching". The
status elements "Value", "Date", "Time" and "ASCII text" correspond to the display elements of
the same name. This means that separate communication objects for status control may be
available, depending on the configured function of a status element.
Order-No. 7574 00 1X
Software "...590101"
Functional description
Page 64 of 222